Concentration Meter×ソーキ - List of Manufacturers, Suppliers, Companies and Products

Concentration Meter Product List

1~14 item / All 14 items

Displayed results

Oxygen Concentration Meter 'XO-326 2sA' [Rental]

Measuring oxygen concentration, safety checks before work, safety checks during work.

■ Approximately 15,000 hours of operation with two AA batteries. ■ Automatically adjusts oxygen concentration immediately after power-up, and automatic adjustment after power-on can be easily done with the push of a button. ■ Alerts you to abnormalities with an alarm sound and warning light. At the same time, the backlight of the LCD screen also lights up. ■ Equipped with a large and easy-to-understand LCD screen.

  • Environmental Survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Salt Concentration Meter "SALTER C6" [Rental]

You can measure the salt concentration in fresh concrete. Additionally, it has a built-in printer that can print the measurement results on the spot.

【Features】 By adopting a special circuit that reacts only to chloride ions, it has high selectivity and is less susceptible to interference. The initial adjustment and measurement method is equipped with a built-in microcontroller, allowing for easy measurement without the need for special skills or experience.

  • Measurement and analysis equipment leasing and rental
  • Reinforced concrete construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Carbon Dioxide Concentration Meter 'CGP-31' [Rental]

A carbon dioxide concentration meter that can directly measure the concentration of carbon dioxide in the air and in aqueous solutions.

■ The diaphragm glass electrode method is less affected by the influence of other mixed gases, except for volatile weak acids and acidic glass. ■ It is possible to switch between gas phase concentration: % (V/V) and liquid phase concentration: mg/L settings. ■ Energy-saving design, rechargeable batteries can also be used. ■ Equipped with a memory function for 1,000 data entries.

  • Water quality/pH measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Oxygen Concentration Meter 'XO-326-2A' [Rental]

Measure oxygen concentration. Safety check before work, safety check during work.

■Operates for approximately 8000 hours on two AA batteries. ■Automatically adjusts oxygen concentration immediately after power-up, and post-power-up adjustments can be easily made with the press of a button. ■Alerts you to abnormalities with an alarm sound and warning light. The backlight of the LCD screen also lights up simultaneously. ■Equipped with a large and easy-to-read LCD screen. ■Complies with JIS T 8201: 2010 for oxygen deficiency measurement oxygen concentration meters.

  • Environmental Survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Grease Iron Powder Concentration Meter "SDM-72" [Rental]

Easy diagnosis of bearing wear condition! Portable (weight 480g) for on-site measurement.

At I-Soki Co., Ltd., we offer rental services for measuring instruments. The 'SDM-72' is a grease iron powder concentration meter that can quickly measure the metal wear particles contained in the grease within bearings. It allows for the assessment of wear conditions before vibration levels increase, making it effective for diagnosing bearings in low-speed and variable-speed rotating machinery. 【Features】 ■ Ability to confirm wear conditions before vibration levels increase ■ Effective for diagnosing bearings in low-speed and variable-speed rotating machinery ■ Easy measurement by simply inserting the sample grease ■ Portable (weighing 480g), enabling measurements on-site ■ Minimum resolution of 0.001% (Wt), capable of detecting trace amounts *For more details, please refer to the PDF document or feel free to contact us.

  • Measurement and analysis equipment leasing and rental
  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Oxygen and Hydrogen Sulfide Concentration Meter 'XOS-326' [Rental]

Even from a distance, the sensor reliably captures oxygen and hydrogen sulfide gas. The gas concentration is clearly displayed at hand.

■ Separation type for display and sensor units In underground locations such as manholes, gas can be measured by inserting the sensor unit from above ground. This separation type takes advantage of pre-safety checks and ensures the safety of workers, making it useful in various settings. ■ Large LCD display that is easy to read. User-friendly one-touch operation. Gas concentration is displayed in large, easy-to-read three-digit digital numbers. Operation is simple with one-touch functionality. ■ Simultaneous measurement of two gases (oxygen and hydrogen sulfide). Both oxygen and hydrogen sulfide gases can be measured simultaneously. The concentration display for each can be easily switched by pressing a button. ■ Equipped with alarm function. An alarm sounds when the oxygen concentration falls below 19.5% or when the hydrogen sulfide concentration exceeds 10ppm, and the LCD also flashes to alert. ■ The sensor unit has a drip-proof structure. The display unit is also made drip-proof with a leather case. ■ Automatic calibration at 21.0vol% and adjustment function for 0ppm.

  • Environmental Survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Chlorine Disinfection Liquid Concentration Meter 'RC-37P' [Rental]

You can easily measure residual chlorine without reagents. (There may be cases where it cannot be used depending on the measurement target.)

■ No reagents required, low running costs Adopts the polarographic method. No handling or processing of reagents is necessary. ■ Equipped with a memory function for 1000 data points.

  • Water quality/pH measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Grease Iron Powder Concentration Meter "SDM-72" [Rental]

Quickly measure the metal wear particles contained in the grease inside the bearing. For maintenance management of grease-lubricated machinery.

【Features】 ■ By measuring the metal wear particles contained in the grease within the bearing, it is possible to confirm the wear condition before the vibration values increase. ■ Effective for bearing diagnosis in low-speed and variable-speed rotating machines. ■ Measurement can be easily performed by simply inserting a sample of grease. ■ Portable (weight 480g), allowing for measurements on-site. ■ Minimum resolution of 0.001% (Wt), capable of detecting trace amounts.

  • Non-destructive testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sludge Concentration Meter "ML-54" [Rental]

The concentration of activated sludge (MLSS) in purification tanks can be easily measured at the sludge interface.

■ Can measure MLSS concentration, water depth, and sludge interface with one unit ■ Compact and lightweight ■ Automatic zero adjustment function ■ Equipped with calculation functions ■ Data memory function included

  • Water quality/pH measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Oil Concentration Meter "OCMA305" [Rental]

You can measure the oil concentration in the sample water.

■With the push of a button, automatically performs everything from oil extraction to measurement and waste liquid disposal. ■Capable of measuring from low to high concentrations without range switching. ■Uses solvent H-997, which has excellent safety, for extraction, and employs infrared absorption method to measure its content with an infrared analyzer. ■Clear digital display eliminates reading errors. ■Displays the operating status of the device and error details in Japanese. ■Can store data for up to 50 entries. ■Completely quantifies sample water and solvent with a dedicated syringe. ■Built-in stirring blades allow extraction time to be set every 10 seconds. ■Adopts a rotary valve, eliminating the need for manual opening and closing of valves. ■Equipped with a measurement stability display function that automatically determines the stability of measurement values. ■Includes a self-diagnosis function that displays measurement anomalies and device malfunctions.

  • Water quality/pH measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Digital Oxygen Concentration Meter for Combustion Management 'XP-3180E' [Rental]

For combustion management of boilers and similar equipment. This is a combustion management oxygen concentration meter that can measure oxygen concentration at high temperatures.

■Clearly informs concentration measurements with a digital bar graph and digital numbers. ■Continuous use for 100 hours is possible with a single battery replacement (during non-alarm conditions). ■Large and bright alarm display. The red LED alarm display has become even easier to see. ■Flow anomaly detection function (self-diagnoses and notifies of issues such as pump clogging). ■Intrinsic safety explosion-proof structure.

  • Environmental Survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Oxygen Concentration Meter "XO-326ALA" [Rental]

Measure oxygen concentration. Safety check before work, safety check during work.

■Adjustments after power on can be easily made with the span adjustment button. ■Equipped with a large and easy-to-understand LCD screen. ■Intrinsically safe explosion-proof structure i3aG4.

  • Environmental Survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Personal Exposure Concentration Meter 'XV-389' [Rental]

You can check the individual exposure status of chemical substances with a trend graph, making it ideal for risk assessment.

You can check the personal exposure status of chemical substances using a trend graph. This is ideal for chemical substance risk assessment and allows for measurements in accordance with the "Guidelines for Personal Exposure Measurement of Chemical Substances" established by the Japan Society for Occupational Health. You can select target substances from 17 types of chemicals, including toluene, and you will be notified by a buzzer or lamp when the air concentration reaches alarm levels (TWA, STEL). *For details, please refer to the attached catalog PDF. *This product measures and records the air concentration of gaseous chemical substances using a high-sensitivity gas sensor.

  • Environmental Survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Carbon Dioxide Concentration Meter 'CGP-1' [Rental]

The dissolved carbon dioxide (DCO2) in the liquid and the carbon dioxide (CO2) in the gas can be directly measured using the same electrode.

The adoption of the diaphragm glass electrode method enables measurements in both liquid and gas phases. It allows for the direct measurement of dissolved carbon dioxide (DCO2) in liquids and carbon dioxide (CO2) in gases using the same electrode. Its compact and lightweight design, along with easy maintenance and handling, makes it widely usable both indoors and outdoors. 【Features】 ■ Dual use for liquid and gas phases The same electrode allows for the direct measurement of dissolved carbon dioxide (DCO2) in liquids and carbon dioxide (CO2) in gases. ■ Capable of measuring small samples The carbon dioxide electrode (diaphragm glass electrode method) does not consume the sample. Therefore, it can measure small samples and can be inserted into soil, powders, or granular materials for measurement. ■ Direct measurement with high reliability Unlike methods such as the NOIR method, there is no need for a suction pump or carrier gas to deliver the sample (gas) to the detection area. Simply installing the electrode at the measurement location allows for the determination of the carbon dioxide concentration on-site. Additionally, there are no error factors due to variations in carrier gas flow rate. ■ Less susceptible to humidity effects ■ Automatic temperature compensation The temperature characteristics of the electrode are automatically compensated over a wide range of 5 to 50°C. The carbon dioxide concentration at the measurement temperature can be determined quickly and accurately.

  • Water quality/pH measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration